22100 Duramax Flywheel Locking Tool with 36mm 3/4″ Socket Wrench For 6.6L Duramax Engine
Features:
Made of CRV steel, which is heavy duty and is able to anti-rust and resist corrosion, ensure an unparalleled long term trouble-free service.
This tool slips into place under an easily removable inspection plate. Worked great at holding the engine solid while loosened (and tightened) the crank pulley on Duramax （nearly 300 ft-lbs tight. ）
Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions. Saving time than removing the starter for water pump replacement.
Duramax 2500 / 3500 Pickups: Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
Duramax 4500 / 5500 Trucks: Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
36mm Socket: Use 36mm 12 point socket with 3/4″ square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle.
Specifications:
Item Name: Duramax Flywheel Locking Tool
Material: Steel
Color: Black
36mm Socket Size: 2.15in x 2.04in
Toothed Piece Size: 1.6in x 1.28in, 1.7in x 1.3in
Package Included:
1pcs* 36mm Socket
2pcs* Toothed Piece
Reviews
There are no reviews yet.