Universal Gas Struts 220mm-830mm 90N -1100N for Trailer Car & Multi Purpose

Features:

Gas struts: Quality control from factory with 180, 000 cycle testing and 144 hours of shaft salt exposure testing

All passed RoHS test.

Best quality product, tried and tested in the market

Oiled seal and dust resistant shaft

Custom strut lengths and pressures available upon request.

Suitable for trailer, caravan, tent, toolbox

Gas Struts	Open Length	Newton Force	Stroke Length	Shaft Dia	Cylinder Dia
Gas Struts	Open Length	Newton Force	Stroke Length	Shaft Dia	Cylinder Dia
220mm x 90n	220mm	90n	75mm	8mm	18mm	Check Price
250mm x 150n	250mm	150n	80mm	8mm	18mm	Check Price
300mm x 100n	300mm	100n	110mm	8mm	18mm	Check Price
350mm x 220n	350mm	220n	130mm	8mm	18mm	Check Price
380mm x 400n	380mm	400n	150mm	8mm	18mm	Check Price
400mm x 250n	400mm	250n	160mm	8mm	18mm	Check Price
400mm x 350n	400mm	350n	160mm	8mm	18mm	Check Price
432mm x 170n	432mm	170n	220mm	8mm	18mm	Check Price
450mm x 200n	450mm	200n	190mm	8mm	18mm	Check Price
450mm x 350n	450mm	350n	190mm	8mm	18mm	Check Price
475mm x 270n	475mm	270n	195mm	8mm	18mm	Check Price
500mm x 350n	500mm	350n	210mm	8mm	18mm	Check Price
530mm x 260n	530mm	260n	215mm	8mm	18mm	Check Price
585mm x 550n	585mm	550n	255mm	8mm	18mm	Check Price
585mm x 600n	585mm	600n	255mm	8mm	18mm	Check Price
585mm 700n	585mm	700n	255mm	8mm	18mm	Check Price
585mm x 800n	585mm	800n	255mm	8mm	18mm	Check Price
600mm x 600n	600mm	600n	260mm	10mm	21mm	Check Price
600mm x 900n	600mm	900n	260mm	10mm	22mm	Check Price
600mm x 1100n	600mm	1100n	250mm	10mm	22mm	Check Price
670mm x 500n	670mm	500n	320mm	10mm	22mm	Check Price
700mm x 250n	700mm	250n	300mm	10mm	20mm	Check Price
700mm x 900n	700mm	900n	300mm	10mm	22mm	Check Price
800mm x 1100n	800mm	1100n	350mm	10mm	22mm	Check Price
830mm x 500n	830mm	500n	350mm	10mm	22mm	Check Price
830mm x 700n	830mm	700n	350mm	10mm	22mm	Check Price

How To Work Out What Strength Gas Spings You Need.

If you are replacing an existing strut the strength (N) should be printed on the strut you have. Otherwise…

The easiest way to guess the lifting weight required for a gas strut, is to use a set of bathroom scales, and length of timber.

Pick the position where you think the gas strut will be located and place the timber and scales there. This will show you the weight that is being applied in that position. If for example the scales read 20kgs then you need at least a 200N (20kgs x 10) strut to hold the weight.

Remember to take into consideration any extra weight such as a matress.
It is important to select the correct length of strut that will open to the desired height, but also allow the stroke to fully close.

More instruction, please check INSTALLATION GUIDE

Additional advice about the installation and removal of gas struts can be found by click here.